Purifying Your Drinking Water

Overview

Few things are more important to your health and survival during a long emergency than having water that is safe to drink. Knowing how to purify water can help you if your regular water supply becomes contaminated or if you are in a place where clean water is not available. Even if you have stored clean water to use in an emergency, you may run out before the emergency situation has ended.

Water purification can greatly reduce your chance of getting sick from bacteria, viruses, and other living organisms in the water. You can disinfect water using one of the following methods.

• Bring the water to a rolling boil for 1 minute.

  If you are at an elevation of 5,000 ft (1,000 m) or higher, boil the water for 3 minutes. This is the most effective purification method. But it may be impractical if you need large quantities of water. It also requires a heat source, which you may not have in some emergency situations. If fuel or power for your heat source is limited, bringing the water to a boil will usually disinfect it, even if you cannot boil it for the recommended time.

• If you can't boil water, add 8 drops—which is about 1/16 tsp (0.3 mL)—of household liquid bleach for each gallon of water. Stir, and let it stand for 30 minutes. (If the water is cloudy, let it settle and filter through a clean cloth, paper towel, or coffee filter before adding bleach.)

  If the water does not smell slightly like bleach after 30 minutes, add 8 more drops of bleach. Let it stand for another 15 minutes. You should notice a bleach smell.

• If you don't have bleach, you can use iodine or chlorine purification tablets or drops.

  You can get these at stores that sell camping equipment and at some drugstores. Follow the instructions on the package. Purification tablets are not as effective as boiling or disinfecting with bleach. But they do kill some types of organisms.

• Use water filters that can get rid of some microorganisms and improve the taste of water.

  There are many different types of filters. So be sure that you know what kinds of organisms your filter is effective for.

None of the purification methods described above eliminates heavy metals, salts, chemicals, or radioactive dust or dirt (fallout) from water. Many of these substances can be removed by distilling water, a more complicated method of purifying water.